MX165C Datasheet PDF - MX-COM Inc

The MX165C CTCSS Encoder/Decoder is a low voltage, CMOS device that meets TIA/EIA-603 Standards. The MX165C will encode and decode the tones 159.8Hz, 183.5Hz, 189.9Hz, 196.6Hz, 199.5Hz, 206.5Hz, 229.1Hz, and 254.1Hz in addition to the 39 standard CTCSS tones, for a total of 47 CTCSS tones + Notone. With the incorporation of the on-chip TX and RX speech filter, the MX165C enhances voice/tone multiplexing by attenuating TX and RX speech 36dB at frequencies below 250Hz while passing signals > 300Hz with only 1dB of ripple. This not only minimizes CTCSS talk-off in the TX mode but also improves Hum and Noise performance in the RX mode.

FEATUREs
• Meets TIA/EIA-603 Standards
• 47 CTCSS Tones + Notone
• TX/RX Speech Filters
• Improved Sinad
• Serial or Parallel Programming
• Easy µP Interface
• Scanning on any Channel
• Standard 1MHz Xtal (See MX465 for 4MHz)
• Low Voltage 3.3V to 5.0V

APPLICATIONs
• Mobile Radio Channel Sharing
• Scan Trunking
• Wireless Intercom Traffic Control
• Hookswitch Supervision
• Repeater Control