MX26C1000B Datasheet PDF - Macronix International

GENERAL DESCRIPTION
The MX26C1000B is a 5V only, 1M-bit, MTP EPROM™ (Multiple Time Programmable Read Only Memory). It is organized as 128K words by 8 bits per word, operates from a single + 5 volt supply, has a static standby mode, and features fast single address location programming. All programming signals are TTL levels, requiring a single pulse. It is design to be programmed and erased by an EPROM programmer or on-board. The MX26C1000B supports a intelligent fast programming algorithm which can result in programming time of less than one minute.

FEATURES
• 128Kx 8 organization
• Single +5V power supply
• +12V programming voltage
• Fast access time:90/100/120/150 ns
• Totally static operation
• Completely TTL compatible
• Operating current:30mA
• Standby current: 100uA
• 50 minimum erase/program cycles
• Chip erase time: 1 (typ.)
• Chip program time: 6.25 (typ.)
• Typical fast programming cycle duration 10us/byte
• Package type:
    - 32 pin plastic DIP
    - 32 pin PLCC
    - 32 pin TSOP
    - 32 pin SOP