NT7603BDB-01 Datasheet PDF - ETC2

[Novatek]

General Description
The NT7603 is a dot matrix LCD controller and driver LSI that can operate with either a 4-bit or an 8-bit microprocessor (MPU). NT7603 receives control character codes from the MPU, stores them in an internal RAM (up to 80 characters), transforms each character code into a 5 X 7, 5 X 8, or 5 X 10 dot matrix character pattern, and then displays the codes on the LCD panel. The built-in Character Generator ROM consists of 256 different character patterns.

FEATUREs
■ Internal LCD drivers
   16 common signal drivers
   80 segment signal drivers
■ Maximum display dimensions
   16 characters * 2 lines or
   32 characters * 1 line
■ Interfaces with 4-bit or 8-bit MPU
■ Versatile display functions provided on chip:
   Display Clear, Cursor Home, Display ON/OFF, Cursor ON/OFF, Character Blinking, Cursor Shift, and Display Shift
■ Three duty factors, selected by PROGRAM: 1/8, 1/11, and 1/16
■ Displays Data RAM (DD RAM): 80 X 8 bits
   (Displays up to 80 characters)
■ Character Generator RAM (CG RAM):
   64 X 8 bits for general data,
   8 5 X 8 programmable dot patterns, or
   4 5 X 10 programmable dot patterns
■ Low voltage reset
■ ITO option for A-type and B-type LCD waveform
■ Character Generator ROM (CG ROM):
   2 kinds of CG ROM sizes:
      192 characters:
         160 5 X 8 dot patterns
         32 5 X 10 dot patterns
      240 characters:
         192 5 X 8 dot patterns
         48 5 X 10 dot patterns
   Custom CG ROM is also available
■ Built-in power-on reset function
■ Logic power supply: single +5V supply
■ LCD driver power supply: V1~V5 (VDD+0.3 - VDD-7.0) , divided by Built-in LCD power division resister.
■ Two oscillator operations (Freq. = 500KHz - 540KHz):
   • Built-in RC oscillation
   • External clock
■ CMOS Process
■ Available in COG FORM