OPF392C(1996) Datasheet PDF - Optek Technology

Description
The OPF392 series LED consists of a low cost plastic cap LED, pre-mounted and aligned in an ST receptacle. This configuration is designed for PC board or panel mounting. Includes lock washer and jam nut, two 2-56 screws, and a dust cap.
The LEDs are designed to interface with multimode optical fibers from 50/150 to 200/300 microns.

FEATUREs
● Component pre-mounted and ready to use
● Pre-tested with fiber to assure performance
● Popular ST style receptacle
● High Speed
● Electrically isolated from case