P4C168L Datasheet PDF - Semiconductor Corporation

DESCRIPTION
The P4C168, P4C169 and P4C170 are a family of 16,384-bit ultra high-speed static RAMs organized as 4K x 4. All three devices have common input/output ports.The P4C168 enters the standby mode when the chip enable (CE) control goes HIGH; with CMOS input levels, power consumption is only 83mW in this mode. Both the P4C169 and the P4C170 offer a fast chip select access time that is only 67% of the address access time. In addition, the P4C170 includes an output enable (OE) control to eliminate data bus contention. The RAMs oper ate from a single 5V ± 10% tolerance power supply.

FEATURES
Full CMOS, 6T Cell
High Speed (Equal Access and Cycle Times)
  – 12/15/20/25/35ns (Commercial)
  – 20/25/35/45/55/70ns (P4C168 Military)
Low Power Operation (Commercial)
  – 715 mW Active
  – 193 mW Standby (TTL Input) P4C168
  – 83 mW Standby (CMOS Input) P4C168
Single 5V±10% Power Supply
Fully TTL Compatible, Common I/O Ports
Three Options
   – P4C168 Low Power Standby Mode
   – P4C169 Fast Chip Select Control
   – P4C170 Fast Chip Select, Output Enable Controls
Standard Pinout (JEDEC Approved)
   – P4C168: 20-pin DIP, SOJ, LCC, SOIC, CERPACK, and Flat Pack
   – P4C169: 20-pin DIP and SOIC
   – P4C170: 22-pin DIP