P9027LP-RAWGI8 Datasheet PDF - Integrated Device Technology

Description
   The P9027LP-R is a highly integrated, low Bill-of-Materials (BOM) count, single-chip receiver targeted for 0.5 to 3 W applications. Using the magnetic inductive charging technology, it converts an AC power signal from a resonant tank into a regulated programmable DC output voltage ranging from 4.5 to 6.0 Volts.

FEATUREs
■ Small solution area: ~32mm2
■ Patented over-voltage protection clamp eliminating external capacitors
■ Optimized for 0.5 to 3 W applications
■ Integrated low dropout tracking LDO
■ Low synchronous rectifier RDS(ON) for high efficiency
■ Programmable rectifier voltage for optimal transient response versus efficiency
■ Integrated charge pump for startup under weak coupling or poor alignment
■ Programmable output voltage: 4.5 to 6.0 V
■ Programmable current limit
■ Open-drain interrupt flag
■ Power transfer LED indicator
■ Dedicated remote temperature sensing
■ Active low enable pin for electrical on/off
■ I2C interface
■ 0 to +85°C ambient operating temperature range
■ WLCSP 2.24 mm X 3.62 mm, 40 pin package

Typical Applications
■ Smart Watches
■ Headsets
■ Digital Cameras
■ Portable Medical Applications