PAS302BCA-32 Datasheet PDF - Pixart Imaging Inc.

General Description
The PAS302BCA-32 is a highly integrated CMOS active-pixel image sensor that has a VGA resolution of 644H x 484V. The PAS302BCA-32 outputs 10-bit RGB raw data through a parallel data bus and is available in 32-pin LCC package.
The PAS302BCA-32 can be programmed to set the exposure time for different luminance condition via I C 2 TM serial control bus. By programming the internal register sets, it can perform on-chip frame rate adjustment, offset correction DAC and programmable gain control.

FEATUREs
◾ VGA(644 x 484 pixels) resolution, ~1/4”
   Lens
◾ Bayer-RGB color filter array
◾ Output format: 10-bit parallel RGB raw data
◾ On-chip 10-bit pipelined A/D converter
◾ On-chip programmable gain amplifier
   ❐ 4-bit color gain amplifier (x1~x2)
   ❐ 4-bit global gain amplifier (x1~x2)
◾ Digital gain stage
◾ Continuous variable frame
   time(1/2sec~1/30sec)
◾ Continuous variable exposure time
◾ I C 2 TM Interface
◾ Support flash light timing
◾ Single 2.5V / 3.3V supply voltage
◾ < 15mA(~30 fps) power dissipation
◾ 2µA power dissipation when power down
   mode
◾ Window-Of-Interest (WOI)
◾ Sub-sampling
◾ Defect compensation