PI74AVC16836 Datasheet PDF - Pericom Semiconductor Corporation

Description
Pericom Semiconductor’s 20-bit PI74AVC+16836 universal bus driver is designed for 1.65V to 3.6V VCC operation.
Data flow from A to Y is controlled by the Output Enable (OE) input. The device operates in the transparent mode when the latch-enable (LE) input is LOW. When LE is HIGH, the A data is latched if the clock (CLK) input is held at a high or low logic level. If LE is HIGH, the A data is stored in the latch/flip-flop on the low-to-high transition of CLK. When OE is HIGH, the outputs are in the highimpedance state, but all the inputs are enabled and data is capable of being stored in the register.

FEATUREs
• PI74AVC+16836 is designed for low-voltage operation, VCC = 1.65V to 3.6V
• True ±24mA Balanced Drive @ 3.3V
• IOFF supports partial power-down operation
• 3.6V I/O Tolerant inputs and outputs
• Meets PC133 SDRAM Registered DIMM Specifications
• All outputs contain a patented DDC (Dynamic Drive Control) circuit that reduces noise without degrading propagation delay
• Industrial operation: –40°C to +85°C
• Packaging (Pb-free & Green available):
    – 56-pin 240-mil wide plastic TSSOP (A)