PLL103-02XC Datasheet PDF - PhaseLink Corporation

DESCRIPTIONS
The PLL103-02 Rev.D is designed as a 2.5V buffer to distribute high-speed clocks in PC applications. The device has 24 outputs. These outputs can be configured to support four unbuffered DDR DIMMS. The PLL103-02 Rev.D can be used in conjunction with the PLL202-04 or similar clock synthesizer for the VIA Pro 266 chipset. The PLL103-02 Rev.D also has an I2C interface, which can enable or disable each output clock. When power up, all output clocks are enabled (has internal pull up).

FEATURES
• Generates 24 output buffer from one input.
• Supports up to four DDR DIMMS.
• Supports 266MHz DDR SDRAM.
• One additional output for feedback.
• Less than 5ns delay.
• Skew between any outputs is less than 100 ps.
• 2.5V Supply range.
• Enhanced DDR Output Drive selected by I2C.
• Available in 48 pin SSOP.