SC144C(RevD) Datasheet PDF - NEL Frequency Controls

Description
The SC-B1440 Series of quartz crystal oscillators provide enable/disable 3-state LVCMOS compatible signals for bus connected systems. Supplying Pin 1 of the SC-B1440 units with a logic “1" or open enables its Pin 3 output. In the disable mode, Pin 3 presents a high impedance to the load.

FEATUREs
• Wide frequency range–80.0MHz to 125.0MHz (Contact factory for other frequencies)
• User specified tolerance available
• Will withstand vapor phase temperatures of 253°C for 4 minutes maximum
• Space-saving alternative to discrete component oscillators
• 2.5 Volt operation
• High shock resistance, to 1000g
• Low Jitter - Wavecrest jitter characterization available
• High Reliability - NEL HALT/HASS qualified for crystal oscillator start-up conditions
• High Q Crystal actively tuned oscillator circuit
• Power supply decoupling internal
• No internal PLL avoids cascading PLL problems
• High frequencies due to proprietary design
• Metal lid electrically connected to ground to reduce EMI
• Gold plated pads