SMC91C95 Datasheet PDF - SMSC -> Microchip

GENERAL DESCRIPTION
The SMC91C95 is a VLSI Ethernet Controller that combines ISA and PCMCIA interfaces, as well as an interface to a companion modem chip set, in one chip. The SMC91C95 integrates all the MAC and physical layer functions as well as the packet RAM needed to implement a high performance 10BASE-T (twisted pair) node. For 10BASE5 (thick coax), 10BASE2 (thin coax), and 10BASE-F (fiber) implementations, the SMC91C95 interfaces to external transceivers via its AUI port. Only one additional IC is required on most applications.

FEATURES
•  ISA/PCMCIA Single Chip Ethernet Controller With Modem Support
•  6 Kbytes Built-In RAM
•  Supports IEEE 802.3 (ANSI 8802-3) Ethernet Standards
•  Full Duplex Support
•  Hardware Memory Management Unit
•  Built-In AUI and 10BASE-T Network Interfaces
•  Simultasking - Early Transmit and Early Receive Functions
•  Advanced Power Management Features/Including Magic Packet Frame Control
•  Software Compatible with SMC91C92/ SMC91C94 (in ISA Mode)
•  Configuration Registers Implement Cardbus Multi-Function Specification V3.0 with Backward Compatibility to V2.1
•  Interfaces Directly to Lucent Technologies and Rockwell International Modem Chipsets
•  On-Chip Attribute Memory (CIS) of up to 512 Bytes (On Even Addresses) For Card Configuration Information; Expandable Externally
•  Option for Serial or Parallel EEPROM for CIS
•  Optional External Flash Capability for XIP (Execute in Place)
•  Automatic Technology to Detect TX/RX 10BASE-T Tranceiver Pair Miswiring
•  Low Power CMOS Design
•  Supports Magic Packet Wakeup
•  128 Pin VTQFP Package