SPUBAT3A2 Datasheet PDF - Carlo Gavazzi Holding AG

Product Description
   The new Carlo Gavazzi SPUBC puts you in the driving seat of your power management requirements, allocating power, in the most efficient way, between the load and the battery.The maximum available current for battery charging is set by means of a front trimmer. It can go from 20% to 100%, which means that it possible to charge with up to 5A. The priority though is always the load. If the load requires 80% of current, the current available for the battery is only the remaining 20% regardless of the setting.

• Single phase input 115Vac / 230Vac / 277Vac
• Smart power management
• Rated output 5A with permanent 10A overboost
• Max battery charging current 5A
• Suitable for Lead Acid open or sealed, Lead gel
• Automatic Battery diagnostic and battery care
• Boost, Trikle/float and recovery charging cycles.
• Battery reversed polarity, element short circuit or disconnection
• 2 relay outputs for remote status and operation indication
• cURus recognized and CE approved