ST7632 Datasheet PDF - Sitronix Technology Co., Ltd.

INTRODUCTION
The ST7632 is a driver & controller LSI for 4K color graphic dot-matrix liquid crystal display systems. It generates 396 Segment and 132 Common driver circuits. This chip is connected directly to a microprocessor, accepts Serial Peripheral Interface (SPI) or 8-bit/16-bit parallel display data and stores in an on-chip display data RAM. It performs display data RAM read/write operation with no external operating clock to minimize power consumption. In addition, because it contains power supply circuits necessary to drive liquid crystal, it is possible to make a display system with the fewest components.

FEATURES
Driver Output Circuits
    -396 segment outputs / 132 common outputs
Applicable Duty Ratios
    - Various partial display
    - Partial window moving & data scrolling
On-chip Display Data RAM
    - Capacity: 396 x 132 x 4 =209,088 bits
    - 256colors (RGB)=(332) mode
    -4K colors (RGB)=(444) mode
    -Dithered 65K colors (RGB)=(565) mode
    -Dithered 262K colors (RGB)=(666) mode
    -Dithered 16M colors (RGB)=(888) mode
Microprocessor Interface
    - 8/16-bit parallel bi-directional interface with 6800-series or 8080-series
    - 4-line serial interface (4-line-SIF)
    - 3-line serial interface (3-line-SIF)
On-chip Low Power Analog Circuit
    - On-chip oscillator circuit
    - Voltage converter (x2, x3, x4, x5, x6, x7, x8)
    - Voltage regulator
    - On-chip electronic contrast control function
    - Voltage follower (LCD bias: 1/5 to 1/12)
Operating Voltage Range
    - Supply voltage (VDD, VDD1): 2.0 to 3.3V (VDD2, VDD3, VDD4, VDD5): 2.6 to 3.3V V3 & V4 must large than VDD5
    - LCD driving voltage (VLCD = V0 - VSS): 3.76 to 18.0 V
    - Suggest Vop range=12V~14V,LCD bias=1/12.
LCD driving voltage (EEPROM)
    - To store contrast adjustment value for better display
Package Type
    - Application for COG