STEVAL-IFP019V1 Datasheet PDF - STMicroelectronics
Part Name
STEVAL-IFP019V1
Description
Other PDF
no available.
PDF
page
5 Pages
File Size
113.1 kB
MFG CO.
STMicroelectronics
Description
The STEVAL-IFP019V1 demonstration board shows the features of the VNI4140K-32 quad high-side smart-power solid-state relay.
The application offers robustness and complies with EMC industrial standards. It implements short-circuit/overload protection and also thermal management, achieving best-in-class MTBF values. The reference design is suitable for use in programmable logic controllers (PLCs) as well as to drive generic loads which require up to 1 A of nominal current (the typical current limitation is 1.1 - 2.6 A). Thanks to the very low RDS(on) (only 80 mΩ typical @ 25 °C per channel) the device allows very low power consumption during operation and for this reason it offers an ideal solution for IP65 / IP67 requirements. The VNI4140K-32 is compliant with IEC 61131-2 (international standard for programmable controllers).
Features
◾ Output current: 1 A per channel
◾ Shorted load protections
◾ Junction overtemperature protection
◾ Case overtemperature protection for thermal
independence of the channels
◾ Thermal case shutdown non-simultaneous
restart for the various channels
◾ Protection against loss of ground
◾ Current limitation
◾ Undervoltage shutdown
◾ Open drain diagnostic outputs
◾ 3.3 V CMOS/TTL compatible inputs
◾ Fast demagnetization of inductive loads
◾ Conforms to IEC 61131-2
◾ RoHS compliant
Share Link: 
