STEVAL-ISA047V1 Datasheet PDF - STMicroelectronics

Description
This demonstration board is based on the ST1S03A, an adjustable current mode PWM step-down DC-DC converter with internal 1.5 A power switch, packaged in a 6-lead DFN 3x3 mm.
Its a complete 1.5 A switching regulator with its internal compensation eliminating additional component.
The constant frequency, current mode, PWM architecture and stable operation with ceramic capacitors results in low, predictable output ripple.
However, in order to maximize the power conversion efficiency with light load, the regulator reduces automatically the switching frequency when the output load becomes less than 250 mA typically.

FEATUREs
■ Step-down current mode PWM (1.5 MHz) DC-DC converter
■ 2% DC output voltage tolerance
■ Internal soft-start for start-up current limitation and power on delay of 50-100 µs
■ Typical efficiency: > 85%
■ Inhibit function
■ 1.5 A output current capability
■ Not switching quiescent current: max 1.5 mA (overtemperature range)
■ Switch VDS: max 200 mV @ ISW = 750 mA
■ Uses tiny capacitors and inductors
■ RoHS compliant