STSPIN32F0A Datasheet PDF - STMicroelectronics

Description
   The STSPIN32F0A is a System-In-Package providing an integrated solution suitable for driving three-phase BLDC motors using different driving modes.
   It embeds a triple half-bridge gate driver able to drive power MOSFETs with a current capability of 600 mA (sink and source). The high- and low-side switches of same half-bridge cannot be simultaneously driven high thanks to an integrated interlocking function.

FEATUREs
• Extended operating voltage from 6.7 to 45 V
• Three-phase gate drivers
   − 600 mA sink/source
   − Integrated bootstrap diodes
   − Cross-conduction prevention
• 32-bit ARM® Cortex®-M0 core:
   − Up to 48 MHz clock frequency
   − 4-kByte SRAM with HW parity
   − 32-kByte Flash memory with option
      bytes used for write/readout protection
   − Availability FW bootloader
• 3.3. V DC/DC buck converter regulator with
   overcurrent, short-circuit, and thermal
   protection
• 12 V LDO linear regulator with thermal
   protection
• 16 general-purpose I/O ports (GPIO)
• 5 general-purpose timers
• 12-bit ADC converter (up to 9 channels)
• I2C, USART and SPI interfaces
• 3 rail-to-rail operation amplifiers for signal
   conditioning
• Comparator for overcurrent protection with
   programmable threshold
• Standby mode for low power consumption
• UVLO protection on each power supply:
   − VM, VDD, VREG and VBOOTx
• On-chip debug support via SWD
• Extended temperature range: -40 to +125 °C

APPLICATIONs
• Smart manufacturing equipment
• Power tools, FANs and pumps
• Home appliances: vacuum cleaners,
   hand/hair dryers, air purifiers and coffee
   machines
• High-tech applications such as: drones,
   gimbals, educational/home robots