TDA8766 Datasheet PDF - Philips Electronics

GENERAL DESCRIPTION
The TDA8766 is a 10-bit high-speed analog-to-digital converter (ADC) for professional video and other applications. It converts with 2.7 to 5.25 V operation the analog input signal into 10-bit binary-coded digital words at a maximum sampling rate of 20 MHz. All digital inputs and outputs are CMOS compatible. A standby mode allows reduction of the device power consumption down to 4 mW.

FEATURES
• 10-bit resolution
• 2.7 to 5.25 V operation
• Sampling rate up to 20 MHz
• DC sampling allowed
• High signal-to-noise ratio over a large analog input frequency range (9.3 effective bits at 1.0 MHz full-scale input at fclk = 20 MHz)
• In range (IR) CMOS output
• CMOS/TTL compatible digital inputs and outputs
• External reference voltage regulator
• Power dissipation only 53 mW (typical)
• Low analog input capacitance, no buffer amplifier required
• Standby mode
• No sample-and-hold circuit required.

APPLICATIONS
High-speed analog-to-digital conversion for:
    • Video data digitizing
    • Camera
    • Camcorder
    • Radio communication.