TDE1708DFT Datasheet PDF - STMicroelectronics

Description
The TDE1708DFT is an integrated power switch with up to 48 V power supply capability. Two output configurations are possible:
    Load to GND (high side mode)
    Load to VS (low side mode)

Especially dedicated to proximity detectors, its internal +5 V supply can be used to supply external circuits (See also AN495).
A signal is internally generated to block the In signal, and prevent activation of the output switch, as long as an abnormal condition is detected. The power-on transition, as well as the chip over temperature and the output overcurrent, concur to the generation of such signal. A minimum delay of 25 ms (Typ. value) is added to the trailing edge of such signal to ensure that a stable normal situation is present when the signal disappears. The delay (of the disappearance of the block signal; no delay at its on set) can be further increased connecting a capacitor between pin3 and ground. It can drive resistive or inductive loads.

FEATUREs
■ Low side or high side switch configuration
■ 6 V to 48 V supply voltage range
■ Overload and short circuit protections
■ Internal voltage clamping
■ Supply and output reversal protection
■ Thermal shutdown
■ GND and VS open wire protection
■ Adjustable delay at switch on
■ Indicator status led driver
■ +5 V regulated aux. voltage
■ High burst immunity