TPCE636 Datasheet PDF - TEWS Technologies GmbH

Application Information
   The TPCE636 is a half-length X4 PCIe compatible module providing a user configurable Kintex7 FPGA with 16 ADC input channels and 16 DAC output channels.
   The TPCE636 ADC input channels are based on the Linear Dual 16-Bit 5Msps Differential LTC2323-16 ADC. The TPCE636 provides 16 ADC channels. Each of the 16 channels has a resolution of 16bit and can work with up to 5Msps. The analog input circuit is designed to allow input voltages up to ±10V on each input-pin (results in ±20V differential voltage range).

Technical Information
o Form Factor: half-length X4 PCIe
   o Board size: 153 mm x 98 mm
o PCI Express x4 Link (Base Specification 2.1)
   compliant interface conforming to ANSI/VITA
   42.3-2006
o TPCE636 FPGA options:
   o -10R Xilinx XC7K160T-2FBG676I Kintex-7
   o -11R Xilinx XC7K325T-2FBG676I Kintex-7
   o -12R Xilinx XC7K410T-2FBG676I Kintex-7
o Serial Flash for FPGA Configuration
o FPGA clock options:
   o Local clock generator as source for the
      FPGA internal PLL
   o Free programmable Si514 Oscillator
o DDR3 SDRAM bank, 256M x 32 Bit (1GB)
o Front I/O lines
   o 16 differential analog inputs
      o 16 bit resolution
      o 5Msps
      o Factory calibration
   o 16 differential analog outputs
      o 16 bit resolution
      o max. ±10V single ended output
      o Factory calibration
o Back I/O lines
   o 64 single ended or 32 differential back I/O
      lines on a rear 68pin ERNI SMC connector.
   o 4 FPGA Multi-Gigabit-Transceiver on a rear
      Samtec FireFly(c) connector.
o Operating temperature -40°C to +85°C
o MTBF (MIL-HDBK217F/FN2 GB 20°C): 240000h