TPI12011NRL Datasheet PDF - STMicroelectronics

Description
Dedicated devices for ISDN interface and high speed data telecom line protection. Equivalent to a triple Trisil™ with low capacitance.

FEATUREs
■ Bidirectional triple crowbar protection
■ Peak pulse current: IPP = 30 A , 10/1000 µs
■ Breakdown voltage:
    – TPI80N: 80 V
    – TPI120N: 120 V
■ Available in SO-8 package
■ Low dynamic breakover voltage:
    – TPI8011N: 120 V
    – TPI12011N: 170 V

Benefits
■ Low capacitance from lines to ground, allowing high speed transmission without signal attenuation
■ Good capacitance balance between lines to ensure longitudinal balance
■ Fixed breakdown voltage in both common and differential modes
■ The same surge current capability in both common and differential modes
■ A particular attention has been given to the internal wire bonding. The “4-point” configuration ensures a reliable protection, eliminating overvoltages introduced by the parasitic inductances of the wiring (LdI/dt), especially for very fast transient overvoltages

Complies with following standards
■ CCITT K17-K20
    – 10/700 µs, 1.5 kV
    – 5/310 µs, 38 A
■ VDE 0433
    – 10/700 µs, 2 kV
    – 5/310 µs, 50 A
■ VDE 0878
    – 1.2/50 µs, 1.5 kV
    – 1/20 µs, 40 A
■ IEC 61000-4-2 level 4
    – 0.5/700 µs, 1.5 kV
    – 0.2/310 µs, 38 A