TPMC310 Datasheet PDF - TEWS Technologies GmbH

Application Information
   The TPMC310 is a conduction cooled single-width 32 bit PMC module providing two channel of high speed CAN bus interface.
   The PLX PCI9030 PCI Target Chip is used for the PCI interface.
   Two Philips SJA1000 CAN controllers (CAN specification 2.0B supported) are used for the two CAN bus channels.
   The CAN bus I/O interface provides two independent channels, isolated from system logic and from each other.

Technical Information
○ Conduction Cooled single-width 32 bit PMC module
   conforming to IEEE P1386.1
○ PCI 2.1 compliant interface
○ 3.3V and 5V PCI Signaling Voltage
○ Board size: 144 mm x 74 mm
○ CAN Bus Interface
   • Two channel High Speed CAN interface
   • Two Philips SJA1000 CAN controller
   • Supports CAN specification 2.0B
   • I/O interface based on TJA1050 transceiver,
      channels isolated from system logic and from each
      other
   • On board termination option for each CAN bus
      channel
○ Operating temperature range –40°C to +85°C