TPMC362 Datasheet PDF - TEWS Technologies GmbH

Application Information
   The TPMC362 is a conduction cooled single-width 32 bit PMC with four high speed serial data communication channels.
   An Infineon PEF 20534 DMA Supported Serial Communication Controller (DSCC4) with integrated bus master PCI interface is used.
   Several interrupt sources can generate interrupts on INTA for each channel. Interrupts can be enabled and disabled separately.
   A 14.7456 MHz oscillator provides standard asynchronous baud rates. An additional 24 MHz oscillator is provided for other baud rates. A 10 MHz oscillator is used for the maximum synchronous baud rate of 10Mbit/s.

Technical Information
○ Standard single-width 32 bit PMC module conforming
   to IEEE P1386.1
○ PCI 2.1 compliant master/slave interface
○ Board size: 143.75 mm x 74 mm
○ Four high speed synchronous/asynchronous serial
   interfaces based on Infineon PEF20534
○ Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and
   GND on rear connector P14
○ Physical interface (individually programmable per
   channel):
   EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35,
   V.36 and X.21
○ Maximum data rate: 10 Mbit/s (synchronous),
   2 Mbit/s (asynchronous), internal or external provided
   clock
   EIA-232: up to 115.2 kbit/s
○ Temperature range: -40°C to +85°C