UM0723 Datasheet PDF - STMicroelectronics

Introduction
   This document describes the 1 kW three-phase motor control demonstration board featuring the L6390 high and low-side drivers and the STGP10NC60KD IGBT. The demonstration board is an AC/DC inverter that generates a three-phase waveform for driving three or two-phase motors such as induction motors or PMSM motors up to 1000 W with or without sensors.
 
Main characteristics
The information below lists the converter specification data and the main parameters set for the STEVAL-IHM023V2 demonstration board.
● Minimum input voltage 125 VDC or 90 VAC
● Maximum input voltage 400 VDC or 285 VAC
● With applied input voltage doubler - the range is from 65 VAC to 145 VAC
● Voltage range for low-voltage motor control applications from 18 VDC to 35 VDC
● Possibility to use auxiliary +15 V supply voltage
● Maximum output power for motors up to 1000 W
● Regenerative brake control feature
● Input inrush limitation with bypassing relay
● + 15 V auxiliary power supply based on buck converter with VIPer™16
● IGBT power switch STGP10NC60KD in TO-220 package - compatible with other ST
   IGBTs or power MOSFETs in TO-220 package
● Fully populated board conception with testing points and isolated plastic safety cover
● Motor control connector for interface with STM3210B-EVAL board and other ST motor
   control dedicated kits
● Tachometer input
● Hall/encoder inputs
● Possibility to connect BEMF daughterboard for sensorless six-step control of BLDC
   motors
● PCB type and size:
   – Material of PCB - FR-4
   – Double-sided layout
   – Copper thickness: 60 µm
   – Total dimensions of demonstration board: 127 mm x 180 mm.

Target applications
● Washing machines
● Home appliances
● Medical applications - rehabilitative beds
● High-power, high-efficiency water pumps for heating applications.