W30-24S1.8 Datasheet PDF - Intronics Power, Inc.

W30 Series DC/DC MODULES

   The W30 Family of high efficiency DC/DC converters offer power levels of up to 30 Watts, exceeding that of other products with the same Industry-Standard Pinouts, while providing much smaller footprints. With a wide input voltage range and single outputs, ranging from 1.5 to 15 Volts, these converters provide versatility without sacrificing the board space. All models feature an input filter and microcontroller-based protection features. The open frame construction allows very efficient heat transfer with no hot spots. All converters combine creative design practices with highly derated power devices to achieve superior efficiencies (up to 94%), reliability, high performance and low cost solution to systems designers.

Specifications & Features Summary
• No minimum load required
• On/Off pin control
• -40°C to +85°C ambient operation
• Output adjustment +/-10% range
• 1500V, 10MΩ input-to-output isolation
• Output overcurrent protection
• Input Under voltage protection
• Input Over voltage protection
• Synchronous rectification topology
• MTBF of up to 1,000,000 hours @ 50°C (Bellcore)
• Over Voltage protection
• Over Temperature protection
• Please add suffix “A” or “B”, depending on Pinout
• Please add suffix “N” for Negative Logic
• Delivers up to 30W in 1” x 2” package with Industry-Standard Pinouts
• UL 60950 pending, TUV EN60950 and CSA C22.2 No. (Pending)

APPLICATIONs
• Servers, Switches and Data Storage 
• Networking Gear
• Wireless Communications 
• Data Communications
• Distributed Power Architecture 
• Telecommunications
• Semiconductor Test Equipment 
• Industrial / Medical