Z8018110FEC Datasheet PDF - Zilog

GENERAL DESCRIPTION
The Z80181 SAC™ Smart Access Controller (hereinafter, referred to as Z181 SAC) is a sophisticated 8-bit CMOS microprocessor that combines a Z180-compatible MPU (Z181 MPU), one channel of Z85C30 Serial Communication Controller (SCC), a Z80 CTC, two 8-bit general-purpose parallel ports, and two chip select signals, into a single 100-pin Quad Flat Pack (QFP) package (Figures 1 and 2). Created using Zilogs patented Superintegration™ methodology of combining proprietary IC cores and cells, this high-end intelligent peripheral controller is well-suited for a broad range of intelligent communication control applications such as terminals, printers, modems, and slave communication processors for 8-, 16- and 32- bit MPU based systems.

FEATURES
■ Z80180 Compatible MPU Core with 1 Channel of Z85C30 SCC, Z80 CTC, Two 8-Bit General-Purpose Parallel Ports, and Two Chip Select Signals.
■ High Speed Operation (10 MHz)
■ Low Power Consumption in Two Operating Modes:
   - (TBD) mA Typ. (Run Mode)
   - (TBD) mA Typ. (STOP Mode)
■ Wide Operational Voltage Range (5V ±10%)
■ TTL/CMOS Compatible
■ Clock Generator
■ One Channel of Z85C30 Serial Communication Controller (SCC)
■ Z180 Compatible MPU Core Includes:
   - Enhanced Z80 CPU Core
   - Memory Management Unit (MMU) Enables Access to 1MB of Memory
   - Two Asynchronous Channels
   - Two DMA Channels
   - Two 16-Bit Timers
   - Clocked Serial I/O Port
■ On-Board Z84C30 CTC
■ Two 8-Bit General-Purpose Parallel Ports
■ Memory Configurable RAM and ROM Chip Select Pins
■ 100-Pin QFP Package