ACS8514T View Datasheet(PDF) - Semtech Corporation
Part Name
Description
MFG CO.
ACS8514T
Synchronous Equipment Timing Source Partner IC for 2nd T4 DPLL, Accurate Monitoring & Input Extender
Semtech Corporation
'ACS8514T' PDF : 86 Pages View PDF
ACS8514 SETS Buddy
ADVANCED COMMS & SENSING FINAL
DATASHEET
Revision Status/History
The Revision Status, as shown in top right corner of the
datasheet, may be TARGET, PRELIMINARY, or FINAL, and
refers to the status of the Device (not the datasheet), with
the design cycle. TARGET status is used when the design
is being realized but is not yet physically available, and the
datasheet content reflects the intention of the design. The
datasheet is raised to PRELIMINARY status when initial
prototype devices are physically available, and the
datasheet content more accurately represents the
realization of the design. The datasheet is only raised to
FINAL status after the device has been fully characterized,
and the datasheet content updated with measured, rather
than simulated parameter values.
This is a FINAL release of the ACS8514 datasheet.
Changes made for this document revision are given in
Table 31.
Table 31 Revision History
Revision
1.00/April 2003
1.01/May 2003
1.02/July 2003
2.00/September 2003
3.00/April 2007
Reference
Description of changes
All Pages
All Pages
Register 09, bit 6, reg 73, bit 6
Initial datasheet at Preliminary status. Refer to particular release for
the changes made for that release.
General prerelease update for typo’s & reviewer comments. ESD &
Latchup section added & Application schematic
Update to register operation description.
All Pages
Update to Final status
All Pages
Business group name change to Advanced Comms & Sensing.
Front page, Abbreviations and
References
Back Page
Updated for RoHS and WEEE references.
Business group name change to Advanced Comms & Sensing.
Added Lead (Pb) free ordering information
Revision 3.00 April 2007 © Semtech Corp.
Page 85
www.semtech.com
Share Link: 