ADE7753 View Datasheet(PDF) - Analog Devices
Part Name
Description
MFG CO.
'ADE7753' PDF : 60 Pages View PDF
ADE7753
CH1OS REGISTER (0x0D)
The CH1OS register is an 8-bit, read/write enabled register. The MSB of this register is used to switch on/off the digital integrator in
Channel 1, and Bits 0 to 5 indicates the amount of the offset correction in Channel 1. Table 16 summarizes the function of this register.
Table 16. CH1OS Register
Bit Location Bit Mnemonic
0 to 5
OFFSET
6
Not Used
7
INTEGRATOR
Description
The six LSBs of the CH1OS register control the amount of dc offset correction in Channel 1 ADC. The
6-bit offset correction is sign and magnitude coded. Bits 0 to 4 indicate the magnitude of the offset
correction. Bit 5 shows the sign of the offset correction. A 0 in Bit 5 means the offset correction is
positive and a 1 indicates the offset correction is negative.
This bit is unused.
This bit is used to activate the digital integrator on Channel 1. The digital integrator is switched on by
setting this bit. This bit is set to be 0 on default.
7 6 54 3 2 1 0
0 0 0 0 0 0 0 0 ADDR: 0x0D
DIGITAL INTEGRATOR SELECTION
1 = ENABLE
0 = DISABLE
SIGN AND MAGNITUDE CODED
OFFSET CORRECTION BITS
NOT USED
02875-0-086
Figure 97. Channel 1 Offset Register
Rev. C | Page 58 of 60
Share Link: 
