Qdatasheet_Logo
Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site

ATMEGA128L-8MC View Datasheet(PDF) - Atmel Corporation

Part Name
Description
MFG CO.
'ATMEGA128L-8MC' PDF : 395 Pages View PDF
Output Compare
Modulator (OCM1C2)
Overview
The Output Compare Modulator (OCM) allows generation of waveforms modulated with
a carrier frequency. The modulator uses the outputs from the Output Compare Unit C of
the 16-bit Timer/Counter1 and the Output Compare Unit of the 8-bit Timer/Counter2. For
more details about these Timer/Counters see “16-bit Timer/Counter (Timer/Counter1
and Timer/Counter3)” on page 111 and “8-bit Timer/Counter2 with PWM” on page 146.
Note that this feature is not available in ATmega103 compatibility mode.
Figure 72. Output Compare Modulator, Block Diagram
Timer/Counter 1
OC1C
Timer/Counter 2
OC2
Pin
OC1C /
OC2 / PB7
Description
When the modulator is enabled, the two output compare channels are modulated
together as shown in the block diagram (Figure 72).
The Output Compare unit 1C and Output Compare unit 2 shares the PB7 port pin for
output. The outputs of the Output Compare units (OC1C and OC2) overrides the normal
PORTB7 Register when one of them is enabled (i.e., when COMnx1:0 is not equal to
zero). When both OC1C and OC2 are enabled at the same time, the modulator is auto-
matically enabled.
The functional equivalent schematic of the modulator is shown on Figure 73. The sche-
matic includes part of the Timer/Counter units and the port B pin 7 output driver circuit.
Figure 73. Output Compare Modulator, Schematic
COM21
Vcc
COM20
COM1C1
COM1C0
Modulator
0
( From Waveform Generator )
DQ
1
( From Waveform Generator )
OC1C
DQ
1
Pin
0
OC1C /
OC2 / PB7
OC2
DQ
DQ
PORTB7
DATABUS
DDRB7
162 ATmega128
2467O–AVR–10/06
Share Link: GO URL

All Rights Reserved © qdatasheet.com  [ Privacy Policy ] [ Contact Us ]