BNC-P-3C-CR1-CF View Datasheet(PDF) - DDK Ltd.
Part Name
Description
MFG CO.
'BNC-P-3C-CR1-CF' PDF : 15 Pages View PDF
BNC Series
○ Assembly Instruction（5）
Parts CNount1figulrationWasher
Gasket
Clamp
Body Assembly
Nut2
Unit：mm
Nut2
Nut1
Cable
Washer
Gasket
Clamp
Body Assembly
Cable length require for the single ended cable assembly
L =L1+0.3
Cable
L1
①
Washer Sheath
L1
Nut1
Gasket
Washer Sheath
②
Clamp
Nut1 ShGeaastkhet
Clamp
Cut the outer condSuhcetaotrh
along the clamp
Outer Conductor
Center Conductor
（Pre-soldering）
1-1.Cut the cable as fig.1.
1-2. Pre-sollder the center conductor.
Note）Please be careful to not damage the outer
2 0.3
conductor.
8 0.3
1-3．Insert the nut 1, washer and gasket.
Outer Conductor
Center Conductor
（Pre-soldering）
2 0.3
Insu8lat0o.3r
Outer cInosnudluactotor r
2-1.Insert the clamp into the outer conductor and
put it on the sheath.
2-2. Pick the outer conductor and fold down to the
clamp and cut the extra outer conductor along
the clamp.
③
Cable Assembly
Nut1
Cut the outer conductor
along the clamp
9.5
Cable A（ssHeemx bDlyia.）Nut1
Body Assembly
Outer conductor
□12.7
3-1.Insert the above cable assembly into the body.
3-2.Screw up the nut1 to the body.
Recommended screw toque：117.6 〜 147N・㎝
（12 〜 15kgf・㎝）
9.5
Nut2 □12.7
④
（Hex Dia.）
4-1.Solder up the contact with the center
Center CBoondyucAtsosrembly Soldering
conductor
4-2.Screw up the nut2 to the body.
Nut2
Contact
Recommended screw torque：49N・㎝
（5kgf・㎝）
Center Conductor
Soldering
Body Assembly
Contact
◎ Please acknowledge that the specification etc. of this catalog might change by the improvement etc. without notice.
Moreover, the characteristic and the specification of the published product are the reference values.
Please confirm the content with the latest delivery specifications when you use the product.
http://www.ddknet.co.jp Body Assembly
13
Share Link: 
