BNC-P-3C-CR1-CF View Datasheet(PDF) - DDK Ltd.
Part Name
Description
MFG CO.
'BNC-P-3C-CR1-CF' PDF : 15 Pages View PDF
BNC Series
○ Assembly Instruction(6）
Parts Configulration
Nut1
Washer
Nut1
Washer
Gasket
Gasket
Clamp
ClamBpody Assembly
Body Assembly
Nut2
Nut2
Unit：mm
Cable
Cable
L
①
Nut1
L
Washer Gasket
Nut1
Washer Gasket
Outer Conductor
Outer Conductor
11
Cable
②
Cable
11
Clamp Insulator Center Conductor
Clamp Insulator
(Pre-soldering)
Center Conductor
(Pre-soldering)
(3)
2 0.3
Cut the outer conductor
along the clamp (3)
5
0.3
2 0.3
Cut the outer conductor
5 0.3
along the clamp Contact Slit
③
Contact Slit
Cable Assembly
Cable Assembly
9.52
(Hex Dia.)
9.52
(HBexodDyiaA.)ssembly
Body Assembly
④
Soldering
Soldering
□12.7
□12.7
The cable length require for the single ended cable
assembly. L1 =L+3.3
1-1.Insert the nut1, washer and gasket.
1-2. Cut the cable as fig.1.
Note）Please be careful to not damage the outer
conductor.
2-1.Insert the clamp into the outer conductor and
move to the sheath.
2-2.Pick the outer conductor equally. Fold down to
the clamp and cut the extra outer conductor
along the clamp.
3-3.Cut the insulator as fig. 2.
2-4.Pre-solder the center conductor and cut the
center conductor as fig.2.
3-1.Insert the above contact assembly into the
body assembly.
Note）The center conductor is located in the
center of contact slit.
3-2.Move the nut1, washer and gasket to the body.
3-2.Screw up the nut1 to the body.
Recommended screw torque：117.6 〜 147N・㎝
（12 〜 15kgf・㎝）
4-1.Solder up the contact with center conductor.
⑤
Nut2
5-1.Screw up the nut2 to the body.
Nut2
Recommended screw torque：49N・㎝ min.
（5kgf・㎝ min.）
◎ Please acknowledge that the specification etc. of this catalog might change by the improvement etc. without notice.
Moreover, the characteristic and the specification of the published product are the reference values.
Please confirm the content with the latest delivery specifications when you use the product.
http://www.ddknet.co.jp
14
Share Link: 
