E6F-AG5C-C3602M View Datasheet(PDF) - OMRON Corporation
Part Name
Description
MFG CO.
'E6F-AG5C-C3602M' PDF : 32 Pages View PDF
Clearing Settings
Clearing All Programs
The all clear function can be used to delete all cam programs, the
settings for advance angle compensation function, and all other
settings. All settings in the Function Setting Mode will be returned to
their default settings.
Mode
PRGM
TEST
RUN
Set the mode switch to PRGM or TEST.
Initial Display
PRG
H8PS
Clearing Individual Steps, Cams, and Banks
ON/OFF angle settings can be deleted by step, by cam, or by bank. If
settings are deleted by cam, the settings for the advance angle
compensation (ADV) function will not be deleted. If settings are
deleted by bank, the settings for the ADV function will also be
deleted. Settings in the Function Setting Mode will not be deleted.
Mode
PRGM
TEST
RUN
Set the mode switch to PRGM or TEST.
Initial Display
PRG
CAM
STEP
Press the CLEAR Key for 3 s min.
PRG
Confirm that clr flashes on the display.
CAM
CLEAR Key
STEP
Press the WRITE Key.
PRG After the completion of all clear
processing, the screen displays end for
approximately one second and then
resume the previously displayed screen.
If the CLEAR Key is pressed again before
pressing the WRITE Key, the settings will
not be deleted and the previous display
will be resumed.
CAM
STEP
Press the CLEAR Key.
Screens for Individually Clearing Items
PRG Deleting Settings by Step
Press the STEP Keys
to specify the step to be
deleted.
CAM
STEP
PRG Deleting Settings by Cams
Press the CAM Keys
to
specify the cam to be
deleted.
CAM
STEP
CAM
STEP
PRG Deleting Settings by Banks
Press the BANK Key to
specify the bank to be
deleted.
CLEAR Key.
Press the WRITE Key.
PRG After the completion of all clear
processing, the screen displays end for
approximately one second and then
resume the previously displayed screen.
If the CLEAR Key is pressed again before
pressing the WRITE Key, the settings will
not be deleted and the previous display
will be resumed.
25
Share Link: 
