EVAL-AD7762EB View Datasheet(PDF) - Analog Devices
Part Name
Description
MFG CO.
'EVAL-AD7762EB' PDF : 28 Pages View PDF
AD7762
ABSOLUTE MAXIMUM RATINGS
TA = 25°C, unless otherwise noted.
Table 4.
Parameters
AVDD1 to GND
AVDD2–AVDD4 to GND
DVDD to GND
VDRIVE to GND
VIN+, VIN– to GND
Digital input voltage to GND1
MCLK to MCLKGND
VREF to GND2
AGND to DGND
Input Current to Any Pin
Except Supplies3
Operating Temperature Range
Commercial
Storage Temperature Range
Junction Temperature
TQFP Exposed Paddle Package
θJA Thermal Impedance
θJC Thermal Impedance
Lead Temperature, Soldering
Vapor Phase (60 sec)
Infrared (15 sec)
ESD
Rating
−0.3 V to +3 V
−0.3 V to +6 V
−0.3 V to +3 V
−0.3 V to +3 V
−0.3 V to +6 V
−0.3 V to DVDD + 0.3 V
−0.3 V to +6 V
−0.3 V to AVDD4 + 0.3 V
−0.3 V to +0.3 V
±10 mA
−40°C to +85°C
−65°C to +150°C
150°C
92.7°C/W
5.1°C/W
215°C
220°C
600 V
1 Absolute maximum voltage on digital inputs is 3.0 V or DVDD + 0.3 V,
whichever is lower.
2 Absolute maximum voltage on VREF input is 6.0 V or AVDD4 + 0.3 V,
whichever is lower.
3 Transient currents of up to 200 mA do not cause SCR latch-up.
Stresses above those listed under Absolute Maximum Ratings
may cause permanent damage to the device. This is a stress
rating only; functional operation of the device at these or any
other conditions above those listed in the operational sections
of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect
device reliability.
ESD CAUTION
ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily accumulate on the
human body and test equipment and can discharge without detection. Although this product features
proprietary ESD protection circuitry, permanent damage may occur on devices subjected to high energy
electrostatic discharges. Therefore, proper ESD precautions are recommended to avoid performance
degradation or loss of functionality.
Rev. 0 | Page 6 of 28
Share Link: 
