EVAL-CED1Z3 View Datasheet(PDF) - Analog Devices

Part Name

Description

MFG CO.

EVAL-CED1Z3

16-Bit, 10 MSPS, PulSAR Differential ADC

Analog Devices 

Prev 11 12 13 14 15 16 17 18 19 20 Next

AD7626

TRANSFER FUNCTIONS

The AD7626 uses a 4.096 V reference. The AD7626 converts

the differential voltage of the antiphase analog inputs (IN+

and IN−) into a digital output. The analog inputs, IN+ and IN−,

require a 2.048 V common-mode voltage (REF/2).

The 16-bit conversion result is in MSB first, twos complement

format.

The ideal transfer functions for the AD7626 are shown

in Figure 28 and Table 7.

011 ... 111

011 ... 110

011 ... 101

100 ... 010

100 ... 001

100 ... 000

–FSR

–FSR + 1LSB

–FSR + 0.5LSB

+FSR – 1LSB

+FSR – 1.5LSB

ANALOG INPUT

Figure 28. ADC Ideal Transfer Functions (FSR = Full-Scale Range)

Table 7. Output Codes and Ideal Input Voltages

Description

Analog Input

(IN+ − IN−)

REF = 4.096 V

Digital Output Code

Twos Complement (Hex)

FSR − 1 LSB

+4.095875V

0x7FFF

Midscale + 1 LSB +125 μV

0x0001

Midscale

0V

0x0000

Midscale − 1 LSB −125 μV

0xFFFF

−FSR + 1 LSB

−4.095875 V 0x8001

−FSR

− 4.096 V

0x8000

ANALOG INPUTS

The analog inputs, IN+ and IN−, applied to the AD7626 must be

180° out of phase with each other. Figure 29 shows an equivalent

circuit of the input structure of the AD7626.

The two diodes provide ESD protection for the analog inputs,

IN+ and IN−. Care must be taken to ensure that the analog input

signal does not exceed the reference voltage by more than 0.3 V.

If the analog input signal exceeds this level, the diodes become

forward-biased and start conducting current. These diodes can

handle a forward-biased current of 130 mA maximum. However,

if the supplies of the input buffer (for example, the supplies of

the ADA4899-1 in Figure 33) are different from those of the

reference, the analog input signal may eventually exceed the

supply rails by more than 0.3 V. In such a case (for example, an

input buffer with a short circuit), the current limitation can be

used to protect the part.

VDD1

CNV

IN+

OR IN–

67Ω 25pF

Figure 29. Equivalent Analog Input Circuit

The analog input structure allows the sampling of the true

differential signal between IN+ and IN−. By using these differ-

ential inputs, signals common to both inputs are rejected. The

AD7626 shows some degradation in THD with higher analog

input frequencies.

75

70

65

60

55

50

45

1

10

100

1k

10k 100k

1M

10M

INPUT COMMON-MODE FREQUENCY (Hz)

Figure 30. Analog Input CMRR vs. Frequency

Rev. A | Page 16 of 

Share Link: