F-51136NCWHU-FW-AA View Datasheet(PDF) - Optrex Corporation
Part Name
Description
MFG CO.
'F-51136NCWHU-FW-AA' PDF : 19 Pages View PDF
3.Optical Specifications
3.1.Optical Characteristics
Ta=25℃, 1/64 Duty, 1/9 Bias, VD=17.7V (Note 4), θ= 0 ﾟ, φ=－ﾟ
Parameter
Symbol
Conditions
Min. Typ. Max. Units
Contrast Ratio
Note 1
CR
θ= 0 ﾟ, φ=－ﾟ
－
70
－
Chromaticity (white)
x
－
0.302 0.327 0.352
Note 2
y
－
0.301 0.326 0.351
Viewing Angle
Shown in 3.3
Rise Note 3
TON
Ta=25℃
－
210
320
ms
Response Decay Note 4
TOFF
Ta=25℃
－
80
160
ms
Time Rise Note 3
TON
Ta=-30℃
－ 11000 16500 ms
Decay Note 4
TOFF
Ta=-30℃
－
3300 5000
ms
Note 1 : Contrast ratio is definded as follows.
CR = LON / LOFF
LON : Luminance of the ON segments
LOFF : Luminance of the OFF segments
Note 2 : Bucklight Surface Chromaticity : x=0.348, y=0.349
Note 3 : The time that the luminance level reaches 90% of the saturation level from 0% when ON
signal is applied.
Note 4 : The time that the luminance level reaches 10% of the saturation level from 100% when OFF
signal is applied.
Note 5 : Definition of Driving Voltage VD
VD=VCC-VADJ-VBE
Assuming that the typical driving waveforms shown below are applied to the LCD Panel at
1/A Duty - 1/B Bias ( A : Duty Number, B : Bias Number ). Driving voltage VD is definded
as the voltage VO-P when the contrast ratio (CR=LON / LOFF) is at its maximum.
VO-P
1 / ( fF×A )
〈ON SIGNAL〉
1 / fF
( B-2 )×VO-P / B
〈OFF SIGNAL〉
F-51136NCWHU-FW-AA (AA) No.2000-0230
OPTREX CORPORATION
OPTREX
Page 9/19
Share Link: 
