GS-BT2416C1.AT1 View Datasheet(PDF) - STMicroelectronics

Part Name

Description

MFG CO.

GS-BT2416C1.AT1

Bluetooth® class 1 module with embedded SPP SW

STMicroelectronics 

Prev 21 22 23 24 25 26 27 28 29 30 Next

AT command

GS-BT2416C1.AT1

A.21

AT+BTMACROSTOP

Stop the programmable status and store the commands sequence inserted so far into the

flash memory of the module. If the sequence is larger then memory block available an error

will be raised. The command will be available only if a device is set to COMMAND MODE

and only if it come after an AT+BTMACROSTART command.

Due to internal time needed to write a flash memory area a little

time delay is possible before any return value.

Syntax: AT+BTMACROSTOP

Return value: <OK, ERROR>

A.22 AT+BTMACROCLEAR

Erase any possible commands sequence present into the flash memory. This operation is

t(s) non-reversible.

uc Syntax: AT+BTMACROCLEAR

rod Return value: <OK, ERROR>

olete P A.23

Obsolete Product(s) - Obs Note:

AT+BTCONNECT

Initiate an SPP connection to a remote Bluetooth® device. When the connection has been

successfully established the command returns an OK message and GPIO1 is set to high.

It is possible to specify a number of attempts and a time interval between any retry. It also

possible to stop a sequence of connections retry changing the state of GPIO3 (as with the

startup Macro).

When connected with another device the module become “Non-Connectable” and “Non-

Discoverable”.

28/38

Share Link: