GS-BT2416C1.AT1 View Datasheet(PDF) - STMicroelectronics
Part Name
Description
MFG CO.
'GS-BT2416C1.AT1' PDF : 38 Pages View PDF
GS-BT2416C1.AT1
AT command
Syntax: AT+BTCONNECT=BdAddress,PortN, “PinCodeâ€,NRetry, TimeRetry
Parameters:
BdAddress: Bluetooth® address of the remote device. This value is specified as a
6-byte hexadecimal value: i.e.
AT+BTCONNECT=00230A01F0A5
PortN: Port number of the remote SPP port. A value of “0†force the device to
query the remote device for a SPP service port and to get the first valid port; this
behavior is useful for programmed automatic recursive connect.
PinCode: 4 to 16-byte string representing the connection pin code
NRetry: number of possible attempts if the connection fail. A “0†set the device for
infinite attempts. Value range is 0 - 255.
TimeRetry: time interval between attempts in seconds. Value range is 0 - 65535
Return value: <OK, ERROR>
duct(s) A.24
te Pro Note:
AT+BTDISCONNECT
Disconnect the current existing SPP Bluetooth® link. When the link has been closed, the
command returns an OK message and GPIO1 is set to low.
See AT+BTCONNECT
bsole Syntax: AT+BTDISCONNECT
O Return value: <OK, ERROR>
roduct(s) - A.25
AT+ECHO
Enable or disable the output of events and functional messages by the module.
te PSyntax: AT+ECHO=<ON,OFF>
le Parameters:
bso ON: The ECHO mode is enabled and every message or events by the module will
O be outputted. (default)
OFF: The ECHO mode is disabled and no output will be generated.
Return value: <OK, ERROR>
29/38
Share Link: 
