HFBR-2402C View Datasheet(PDF) - HP => Agilent Technologies
Part Name
Description
MFG CO.
HFBR-2402C
HP => Agilent Technologies
'HFBR-2402C' PDF : 31 Pages View PDF
Package Outline
Port Product
DATE CODE
5.1
(0.20)
2.5 DIA. PIN CIRCLE
(0.10)
8.6 DIA.
(0.34)
12
43
7.1
(0.28)
0.46 DIA.
(0.018)
13.2
(0.52)
9.1
(0.36)
2.0
(0.08)
4.1
(0.16)
ALL DIMENSIONS IN MILLIMETERS AND (INCHES).
18.5
(0.73)
(07.2.18)DIA.
7.1
(0.28)
DIA.
8.4
(0.33)
7.6
(0.30)
ACROSS
THREAD
FLATS
3/8 - 32 UNEF - 2A
THREADING
The HFBR-4411 kit consists of
100 nuts and 100 washers with
dimensions as shown in Figure 1.
These kits are available from HP
or any authorized distributor. Any
standard size nut and washer will
work, provided the total thickness
of the wall, nut, and washer does
not exceed 0.2 inch (5.1mm).
When preparing the chassis wall
for panel mounting, use the
mounting template in Figure 2.
When tightening the nut, torque
should not exceed 0.8
N-m (8.0 in-lb).
Ordering Information
To order the Threaded ST Port
Option with a particular compo-
nent, place a “T” after the base
part number. For example, to
order an HFBR-2416 with this
option, order an HFBR-2416T.
This option is available with the
following part numbers:
HFBR-1412
HFBR-1414
HFBR-1442
HFBR-1444
HFBR-1462
HFBR-1464
HFBR-2412
HFBR-2414
3/8 - 32 UNEF -
2A THREAD
9.53 DIA.
(0.375)
(102..5700)DIA.
1.65
(0.065)
14.27 TYP.
(0.563) DIA.
10.41 MAX.
(0.410) DIA.
INTERNAL TOOTH LOCK WASHER
ALL DIMENSIONS IN MILLIMETERS AND (INCHES).
Figure 1. HFBR-4411 Mechanical Dimensions.
74
9.80
(0.386)
DIA.
8.0
(0.315)
ALL DIMENSIONS IN MILLIMETERS
AND (INCHES).
Figure 2. Recommended Cut-out for
Panel Mounting.
Share Link: 