HI-3200PCTF View Datasheet(PDF) - Holt Integrated Circuits
Part Name
Description
MFG CO.
'HI-3200PCTF' PDF : 59 Pages View PDF
HI-3200, HI-3201
Op-Code
Index
Value
ARINC 429 BYTES 2 - 4 DESCRIPTOR
76543210
76543210
MSB
LSB MSB
LSB
ACTION BYTE
VALUE BYTE
Op-Code Index
000
XXXXX
001
XXXXX
010
XXXXX
011
CCCXX
Value
XXXXXXXX
XXXXXXXX
LLLLLLLL
LLLLLLLL
100
CCCBB
LLLLLLLL
101
CCCBB
LLLLLLLL
110
XBBBB
NNNNNNNN
111
XBBBB
NNNNNNNN
Description
No-Op op-code. ARINC 429 word construction will be terminated and the
sequencer will move on to the next descriptor in the table.
No-Op op-code. ARINC 429 word construction will be terminated and the
sequencer will move on to the next descriptor in the table.
Immediate data. The value contained in the descriptor value data byte is
loaded into this byte position of the ARINC 429 32-bit message to be
transmitted.
Immediate data conditional. The NEWTXn bit corresponding to the ARINC
Data RAM location defined by channel “CCC” and label block “LLLLLLLL” is
read. LLLLLLLL is used if NEWTXn is set for this or any other
conditional opcode within this descriptor frame. If NEWTXn = 0 for all
conditional op codes (within this descriptor frame) then no transmission
occurs for this frame and the sequencer increments to the next descriptor
frame. The NEWTXn bit for the referenced ARINC RAM block is reset.
Indexed data. The value of ARINC Data RAM location defined by channel
“CCC”, label block “LLLLLLLL” and byte number “BB” is loaded into this byte
position of the ARINC 429 label to be transmitted.
Indexed data conditional. The NEWTXn bit corresponding to the ARINC
Data RAM location defined by channel “CCC”, label block “LLLLLLLL” and
byte number “BB” is read. The corresponding byte is used if
NEWTXn is set for this or any other conditional opcode within this
descriptor frame. If NEWTXn = 0 for all conditional op codes (within this
descriptor frame) then no transmission occurs for this frame and the
sequencer increments to the next descriptor frame. The NEWTXn bit for the
referenced ARINC RAM block is reset.
CAN byte. The value of the byte at CAN RAM address filter block
“NNNNNNNN”, byte number “BBBB” is loaded into the ARINC buffer byte
position to be transmitted.
CAN byte conditional. The NEWTXn bit corresponding to the CAN RAM
address filter block “NNNNNNNN”, byte number “BBBB”
is read. The corresponding byte is used if NEWTXn is set for this or any
other conditional opcode within this descriptor frame. If NEWTXn = 0 for
all conditional op codes (within this descriptor frame) then ARINC word
construction is terminated, no transmission occurs for this frame and the
sequencer increments to the next descriptor frame. The NEWTXn bit for the
referenced CAN RAM address filter block is reset.
HOLT INTEGRATED CIRCUITS
30
Share Link: 
