HT56R666 View Datasheet(PDF) - Holtek Semiconductor
Part Name
Description
MFG CO.
'HT56R666' PDF : 104 Pages View PDF
HT56R66/HT56R666
· Watchdog Time-out Reset during Normal Operation
The Watchdog time-out Reset during normal opera-
tion is the same as a hardware RES pin reset except
that the Watchdog time-out flag TO will be set to ²1².
W D T T im e - o u t
tR S T D
S S T T im e - o u t
C h ip R e s e t
WDT Time-out Reset during Normal Operation
Timing Chart
· Watchdog Time-out Reset during Power Down
The Watchdog time-out Reset during Power Down is
a little different from other kinds of reset. Most of the
conditions remain unchanged except that the Pro-
gram Counter and the Stack Pointer will be cleared to
²0² and the TO flag will be set to ²1². Refer to the A.C.
Characteristics for tSST details.
W D T T im e - o u t
tS S T
S S T T im e - o u t
WDT Time-out Reset during Power Down
Timing Chart
Reset Initial Conditions
The different types of reset described affect the reset
flags in different ways. These flags, known as PDF and
TO are located in the status register and are controlled
by various microcontroller operations, such as the
Power Down function or Watchdog Timer. The reset
flags are shown in the table:
TO PDF
RESET Conditions
0 0 RES reset during power-on
u u RES or LVR reset during normal operation
1 u WDT time-out reset during normal operation
1 1 WDT time-out reset during Power Down
Note: ²u² stands for unchanged
The following table indicates the way in which the vari-
ous components of the microcontroller are affected after
a power-on reset occurs.
Item
Condition After RESET
Program Counter Reset to zero
Interrupts
All interrupts will be disabled
WDT
Clear after reset, WDT begins
counting
Timer/Event Counter Timer Counter will be turned off
Prescaler
The Timer Counter Prescaler
will be cleared
Input/Output Ports I/O ports will be setup as inputs
Stack Pointer
Stack Pointer will point to the
top of the stack
Rev. 1.40
75
May 11, 2012
Share Link: 
