Integrated
Circuit
Systems, Inc.
PRELIMINARY
ICS8344
LOW SKEW, 1-TO-24
DIFFERENTIAL-TO-LVCMOS FANOUT BUFFER
TABLE 5A. AC ELECTRICAL CHARACTERISTICS, VDDI = VDDO = 3.3V±5%, TA = 0°C TO 70°C
Symbol Parameter
Test Conditions
Minimum Typical Maximum Units
fMAX Maximum Input Frequency
167
VPP Peak-to-Peak Input Voltage
f = 167MHz
0.3
1.3
VCMR Common Mode Input Voltage
f = 167MHz
0.9
2
tpLH Propagation Delay, Low-to-High
0MHz ≤ f ≤ 167MHz
2.6
4.3
tpHL Propagation Delay, High-to-Low
0MHz ≤ f ≤ 167MHz
2.4
4.3
tsk(b) Bank Skew; NOTE 2
Measured on the rising edge of
VDDO/2
150
tsk(o) Output Skew; NOTE 3
Measured on the rising edge of
VDDO/2
275
tsk(pp) Part-to-Part Skew; NOTE 4
Measured on the rising edge of
VDDO/2
600
tR
Output Rise Time; NOTE 5
30% to 70%
200
1000
tF
Output Fall Time; NOTE 5
30% to 70%
200
1000
tPW Output Pulse Width
0MHz ≤ f ≤ 167MHz
f = 167MHz
tCYCLE/2-
- 0.65
2.35
tCYCLE/2
2.5
tCYCLE/2
+ 0.65
3.65
tEN
Output Enable Time; NOTE 5
f = 66.7MHz
5
tDIS Output Disable TIme; NOTE 5
f = 66.7MHz
4
NOTE 1: All parameters measured at 167MHz and VPPmin unless noted otherwise.
All outputs terminated with 50Ω to VDDO/2.
NOTE 2: Defined as skew within a bank of outputs at the same voltages and with equal load conditions.
NOTE 3: Defined as skew across banks of outputs at the same supply voltages and with equal load conditions.
NOTE 4: Defined as the skew at different outputs on different devices operating at the same supply voltages
with equal load conditions.
NOTE 5: These parameters are guaranteed by characterization. Not tested in production.
MHz
V
V
ns
ns
ps
ps
ps
ps
ps
ns
ns
ns
ns
8344
www.icst.com
5
REV. B FEBRUARY 2, 2001