KB2516 View Datasheet(PDF) - Samsung
Part Name
Description
MFG CO.
'KB2516' PDF : 30 Pages View PDF
KB2516 (Preliminary)
TRIPLE 8-BIT ANALOG-TO-DIGITAL CONVERTER
Read Mode: R/W = 1 (auto = X)
SEN
SCL
SDA
Sub-address (N)
Data (N)
Data (N+1)
Data (N+2)
From master to slave
From slave to master
Figure 5. Wired Interface Read Mode Timing Diagram
Serial Interface Description
Pre-amp Gain Control
• Coarse gain control (S00)
RGB coarse gain control with same value. (dynamic gain range: 40dB)
• Fine gain control (S01 - S03)
RGB fine gain control independently. (dynamic gain range : 11 dB)
• Coarse brightness control (S04)
RGB coarse brightness control with same value. (clamp range: 0 - 4V)
• Fine brightness control (S05 - S07)
RGB fine bright control independently. (clamp range: -0.5V - 0.5V)
Sync Processor Control
• HSYNC selection control (HSEL)
HSEL = 0: Internally polarity converted HSYNC is used
HSEL = 1: Default HSYNC is used
• HSYNC input polarity control (PHSYNC)
It is available if HSEL = 1
PHSYNC = 0: Default HSYNC input is used
PHSYNC = 1: Inverted HSYNC input is used
• Clamp control clock selection (CLPENB)
CLPENB = 0: Internal clamp signal
CLPENB = 1: External clamp signal (by CLPex)
20
Share Link: 
