Qdatasheet_Logo
Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site

L6474PD View Datasheet(PDF) - STMicroelectronics

Part Name
Description
MFG CO.
L6474PD
ST-Microelectronics
STMicroelectronics ST-Microelectronics
'L6474PD' PDF : 53 Pages View PDF
Phase current control
Figure 12. Fast decay tuning during the falling steps
'BMMJOHTUFQ
TUGBTUEFDBZ
U'"--'"--@45&1
SFGFSFODFDVSSFOU
'BMMJOHTUFQ
TUGBTUEFDBZ
U'"--'"--@45&1
L6474
OEGBTUEFDBZ
U'"--'"--@45&1
5JNF
7.4
Torque regulation (output current amplitude regulation)
The output current amplitude can be regulated in two ways: writing the TVAL register or
varying the ADCIN voltage value.
The EN_TQREG bit (CONFIG register) sets the torque regulation method. If this bit is high,
ADC_OUT prevalue is used to regulate output current amplitude (see Section 9.1.8 on page
37). Otherwise the internal analog to digital converter is at the user’s disposal and the output
current amplitude is managed by the TVAL register (see Section 9.1.4 on page 34).
The voltage applied to the ADCIN pin is sampled at fS frequency and converted in an NADC
bit digital signal. The analog to digital conversion result is available in the ADC_OUT
register.
30/53
DocID022529 Rev 4
Share Link: GO URL

All Rights Reserved © qdatasheet.com  [ Privacy Policy ] [ Contact Us ]