Soft-start
L6713A
16.3
Low-side-less startup
In order to avoid any kind of negative undershoot on the load side during start-up, L6713A
performs a special sequence in enabling LS driver to switch: during the soft-start phase, the
LS driver results disabled (LS = OFF) until the HS starts to switch. This avoid the dangerous
negative spike on the output voltage that can happen if starting over a pre-biased output
(See Figure 21).
This particular feature of the device masks the LS turn-ON only from the control loop point of
view: protections are still allowed to turn-ON the LS MOSFET in case of over voltage if
needed.
Figure 21. Low-side-less start-up comparison
46/64