LPC1769 View Datasheet(PDF) - NXP Semiconductors.
Part Name
Description
MFG CO.
'LPC1769' PDF : 79 Pages View PDF
NXP Semiconductors
LPC1769/68/67/66/65/64/63
32-bit ARM Cortex-M3 microcontroller
order to keep the noise coupled in via the PCB as small as possible. Also parasitics
should stay as small as possible. Values of Cx1 and Cx2 should be chosen smaller
accordingly to the increase in parasitics of the PCB layout.
14.4 Standard I/O pin configuration
Figure 35 shows the possible pin modes for standard I/O pins with analog input function:
• Digital output driver: Open-drain mode enabled/disabled
• Digital input: Pull-up enabled/disabled
• Digital input: Pull-down enabled/disabled
• Digital input: Repeater mode enabled/disabled
• Analog input
The default configuration for standard I/O pins is input with pull-up enabled. The weak
MOS devices provide a drive capability equivalent to pull-up and pull-down resistors.
pin configured
as digital output
driver
open-drain enable
output enable
data output
pin configured
as digital input
repeater mode
enable
pull-up enable
pull-down enable
VDD
VDD
strong
pull-up
strong
pull-down
ESD
PIN
ESD
VDD
VSS
weak
pull-up
weak
pull-down
data input
pin configured
as analog input
analog input
select analog input
Fig 35. Standard I/O pin configuration with analog input
002aaf272
LPC1769_68_67_66_65_64_63
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 7 — 5 April 2011
© NXP B.V. 2011. All rights reserved.
70 of 79
Share Link: 
