M24C02-125 View Datasheet(PDF) - STMicroelectronics
Part Name
Description
MFG CO.
'M24C02-125' PDF : 30 Pages View PDF
M24C16-125 M24C08-125 M24C04-125 M24C02-125
4
Initial delivery state
Initial delivery state
The device is delivered with all bits in the memory array set to 1 (each byte contains FFh).
5
Maximum rating
Stressing the device outside the ratings listed in Table 4 may cause permanent damage to
the device. These are stress ratings only, and operation of the device at these, or any other
conditions outside those indicated in the operating sections of this specification, is not
implied. Exposure to absolute maximum rating conditions for extended periods may affect
device reliability.
Table 4. Absolute maximum ratings
Symbol
Parameter
Min.
Max. Unit
Ambient operating temperature
–40
130
°C
TSTG
TLEAD
Storage temperature
Lead temperature during soldering
–65
150
°C
see note (1)
°C
IOL
DC output current (SDA = 0)
-
5
mA
VIO
Input or output range
–0.50
6.5
V
VCC
VESD
Supply voltage
Electrostatic pulse (human body model)(2)
–0.50
6.5
V
-
4000
V
1. Compliant with JEDEC Std J-STD-020C (for small body, Sn-Pb or Pb assembly), the ST ECOPACK®
7191395 specification, and the European directive on Restrictions on Hazardous Substances (RoHS)
2002/95/EU.
2. Positive and negative pulses applied on pin pairs, according to AEC-Q100-002 (compliant with JEDEC Std
JESD22-A114, C1=100 pF, R1=1500 Ω, R2=500 Ω).
Doc ID 022564 Rev 1
19/30
Share Link: 
