M40SZ100W_07 View Datasheet(PDF) - STMicroelectronics
Part Name
Description
MFG CO.
'M40SZ100W_07' PDF : 25 Pages View PDF
DC and AC parameters
M40SZ100Y, M40SZ100W
Table 7. DC characteristics (continued)
Sym
Parameter
Test condition(1)
M40SZ100Y
Min Typ Max
M40SZ100W
Unit
Min Typ Max
VPFD
Power-fail deselect
voltage
PFI input threshold
VPFI
PFI hysteresis
VSO
Battery back-up
switchover voltage
VCC = 5V(Y)
VCC = 3V(V)
PFI rising
4.20
4.4
0
1.225
1.2
50
20
2.5
4.50
1.275
70
2.55 2.60 2.70 V
1.225
1.25
0
1.275
V
20
70 mV
2.5
V
1. Valid for ambient operating temperature: TA = –40 to 85°C; VCC = 2.7 to 3.6V or 4.5 to 5.5V(except where noted).
2. Measured with VOUT and ECON open.
3. RSTIN internally pulled-up to VCC through 100kΩ resistor.
4. Outputs deselected.
5. External SRAM must match SUPERVISOR chip VCC specification (3V or 5V).
6. For rechargeable back-up, VBAT (max) may be considered VCC – 0.5V.
7. For PFO pin (CMOS).
8. Chip enable output (ECON) can only sustain CMOS leakage currents in the battery back-up mode. Higher leakage currents
will reduce battery life.
9. For RST & BL pins (open drain).
18/25
Share Link: 
