M41T00S View Datasheet(PDF) - STMicroelectronics
Part Name
Description
MFG CO.
'M41T00S' PDF : 26 Pages View PDF
DC and AC parameters
5
DC and AC parameters
M41T00S
Note:
This section summarizes the operating and measurement conditions, as well as the DC and
AC characteristics of the device. The parameters in the following DC and AC Characteristic
tables are derived from tests performed under the Measurement Conditions listed in the
relevant tables. Designers should check that the operating conditions in their projects match
the measurement conditions when using the quoted parameters.
Table 5.
Operating and AC measurement conditions
Parameter
Supply voltage (VCC)
Ambient operating temperature (TA)
Load capacitance (CL)
Input rise and fall times
Input pulse voltages
Input and output timing ref. voltages
Output Hi-Z is defined as the point where data is no longer driven.
M41T00S
2.7 to 5.5 V
–40 to 85°C
100 pF
≤ 50 ns
0.2VCC to 0.8 VCC
0.3VCC to 0.7 VCC
Figure 12. AC measurement I/O waveform
0.8VCC
0.2VCC
0.7VCC
0.3VCC
AI02568
Table 6. Capacitance
Symbol
Parameter(1)(2)
Min
CIN
COUT(3)
tLP
Input capacitance
Output capacitance
Low-pass filter input time constant (SDA and SCL)
1. Effective capacitance measured with power supply at 5V; sampled only, not 100% tested.
2. At 25°C, f = 1 MHz
3. Outputs deselected.
Max
7
10
50
Unit
pF
pF
ns
18/26
Share Link: 
