PCF2127 View Datasheet(PDF) - NXP Semiconductors.
Part Name
Description
MFG CO.
'PCF2127' PDF : 101 Pages View PDF
NXP Semiconductors
PCF2127
Accurate RTC with integrated quartz crystal for industrial applications
9''
9RSHU LQW
9RSHU LQW
9''
9%$7
9WK VZ EDW
9
9ORZ
9
9''
966
9%$7
EDWWHU\GLVFKDUJH
9RSHU LQW
9''
9%$7
966
26)
DDM
(1) Theoretical state of the signals since there is no power.
(2) The oscillator stop flag (OSF), set logic 1, indicates that the oscillation has stopped and a reset has
occurred since the flag was last cleared (OSF set logic 0). In this case, the integrity of the clock
information is not guaranteed. The OSF flag is cleared by command.
Fig 15. Power failure event due to battery discharge: reset occurs
8.8 Reset function
The PCF2127 has a Power-On Reset (POR) and a Power-On Reset Override (PORO)
function implemented.
8.8.1 Power-On Reset (POR)
The POR is active whenever the oscillator is stopped. The oscillator is considered to be
stopped during the time between power-on and stable crystal resonance (see Figure 16).
This time may be in the range of 200 ms to 2 s depending on temperature and supply
voltage. Whenever an internal reset occurs, the oscillator stop flag is set (OSF set
logic 1).
The OTP refresh (see Section 8.3.2 on page 13) should ideally be executed as the first
instruction after start-up and also after a reset due to an oscillator stop.
PCF2127
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 8 — 19 December 2014
© NXP Semiconductors N.V. 2014. All rights reserved.
28 of 100
Share Link: 
