PIC10LF320 View Datasheet(PDF) - Microchip Technology
Part Name
Description
MFG CO.
'PIC10LF320' PDF : 210 Pages View PDF
PIC10(L)F320/322
REGISTER 10-3: LATA: PORTA DATA LATCH REGISTER
U-0
—
bit 7
U-0
U-0
U-0
U-0
—
—
—
—
R/W-x/u
LATA2
R/W-x/u
LATA1
R/W-x/u
LATA0
bit 0
Legend:
R = Readable bit
u = Bit is unchanged
‘1’ = Bit is set
W = Writable bit
x = Bit is unknown
‘0’ = Bit is cleared
U = Unimplemented bit, read as ‘0’
-n/n = Value at POR and BOR/Value at all other Resets
bit 7-3
bit 2-0
Unimplemented: Read as ‘0’.
LATA<2:0>: RA<2:0> Output Latch Value bits
Note 1: Writes to PORTx are actually written to the corresponding LATx register. Reads from LATx register return
register values, not I/O pin values.
REGISTER 10-4: ANSELA: PORTA ANALOG SELECT REGISTER
U-0
—
bit 7
U-0
U-0
U-0
U-0
R/W-1/1
—
—
—
—
ANSA2
R/W-1/1
ANSA1
R/W-1/1
ANSA0
bit 0
Legend:
R = Readable bit
u = Bit is unchanged
‘1’ = Bit is set
W = Writable bit
x = Bit is unknown
‘0’ = Bit is cleared
U = Unimplemented bit, read as ‘0’
-n/n = Value at POR and BOR/Value at all other Resets
bit 7-3
bit 2-0
Unimplemented: Read as ‘0’.
ANSA<2:0>: Analog Select between Analog or Digital Function on Pins RA<2:0>, respectively
1 = Analog input. Pin is assigned as analog input(1). Digital Input buffer disabled.
0 = Digital I/O. Pin is assigned to port or Digital special function.
Note 1: Setting a pin to an analog input automatically disables the digital input circuitry. Weak pull-ups, if
available, are unaffected. The corresponding TRIS bit must be set to Input mode by the user in order to
allow external control of the voltage on the pin.
DS40001585D-page 70
2011-2015 Microchip Technology Inc.
Share Link: 
