SRTAG2K-D View Datasheet(PDF) - STMicroelectronics
Part Name
Description
MFG CO.
SRTAG2K-D
STMicroelectronics
'SRTAG2K-D' PDF : 51 Pages View PDF
SRTAG2K-D
RF command sets
5.6.3
NDEF Tag Application Select command
the RF host shall send this command to activate the NDEF Tag Application.
To activate the NDEF Tag Application, the RF host sends the Select command (see
Table 21) in addition to the sequence defined in the NFC Forum digital protocol.
Table 21 defines the C-APDU of the Select command to select the NDEF Tag Application
(called NDEF Tag Application Select).
Table 21. C-APDU of the NDEF Tag Application Select command
Name
CLA
INS
P1
P2
Lc
Data
Value
0x00
0xA4
0x04
0x00
0x07
0xD27600
00850101
Class byte
Select instruction code
P1 field
P2 field
Number of bytes of data
Application ID
Le field
Le
0x00
Table 22 defines the R-APDU of the NDEF Tag Application Select command.
Length
Value
Value
Value
Table 22. R-APDU of the NDEF Tag Application Select command
Data
SW1
SW2
Comment
-
1 byte
1 byte -
-
0x90
0x00
Command completed
-
0x6A
0x82
NDEF Tag Application not found
-
0x6D
0x00
Class not supported
5.6.4
Capability Container Select command
The RF host uses the Capability Container Select procedure to select the capability
container (CC) file.
The CC file is selected when this command returns "command completed" in the R-APDU.
Table 23 defines the C-APDU of the Select command to select the CC file (called Capability
Container Select).
DocID025446 Rev 3
25/51
Share Link: 